• Your shopping cart is empty!



110uH 500mA Drum Core Inductor - 10x12

Model:  110uH-500mA-10x12
Category: 500mA Inductors
110uH - 0.11mH 500mA Radial Leaded Drum Core Power Inductor With Heat Shrink Sleeve Covering.
Inductance: 110uH (0.11mH) ±10%, Current Rating (RMS): 500mA, Diameter: 10.5mm ±0.5mm, Height: 12.5mm ±0.5mm, Lead spacing: 5.5mm ±0.5mm Shielding: Unshielded, Mounting Type: Through Hole, Package/Case: Radial, 10x12 Vertical Drum Core

Rs  45.10

   ( Out Of Stock )

  Qty  

120uH 500mA Drum Core Inductor - 10x12

Model:  120uH-500mA-10x12
Category: 500mA Inductors
120uH - 0.12mH 500mA Radial Leaded Drum Core Power Inductor With Heat Shrink Sleeve Covering.
Inductance: 120uH (0.12mH) ±10%, Current Rating (RMS): 500mA, Diameter: 10.5mm ±0.5mm, Height: 12.5mm ±0.5mm, Lead spacing: 5.5mm ±0.5mm Shielding: Unshielded, Mounting Type: Through Hole, Package/Case: Radial, 10x12 Vertical Drum Core

Rs  46.00

   ( Out Of Stock )

  Qty  

130uH 500mA Drum Core Inductor - 10x12

Model:  130uH-500mA-10x12
Category: 500mA Inductors
130uH - 0.13mH 500mA Radial Leaded Drum Core Power Inductor With Heat Shrink Sleeve Covering.
Inductance: 130uH (0.13mH) ±10%, Current Rating (RMS): 500mA, Diameter: 10.5mm ±0.5mm, Height: 12.5mm ±0.5mm, Lead spacing: 5.5mm ±0.5mm Shielding: Unshielded, Mounting Type: Through Hole, Package/Case: Radial, 10x12 Vertical Drum Core

Rs  46.90

   ( Out Of Stock )

  Qty  

140uH - 0.14mH Power Inductor - 500mA

Model:  140uH-500mA-10x12
Category: 500mA Inductors
140uH 500mA Radial Power Inductor
Max. Current: 500mA, Diameter: 10.5mm, Height: 12.5mm, Lead spacing: 5.5mm ±0.5mm
Inductance: 0.14mH (140uH) ±10%, DC Resistance: 0.168 Ohm ±10%

Rs  43.00

   ( Out Of Stock )

  Qty  

150uH 500mA Drum Core Inductor - 10x12

Model:  150uH-500mA-10x12
Category: 500mA Inductors
150uH - 0.15mH 500mA Radial Leaded Drum Core Power Inductor With Heat Shrink Sleeve Covering.
Inductance: 150uH (0.15mH) ±10%, Current Rating (RMS): 500mA, Diameter: 10.5mm ±0.5mm, Height: 12.5mm ±0.5mm, Lead spacing: 5.5mm ±0.5mm Shielding: Unshielded, Mounting Type: Through Hole, Package/Case: Radial, 10x12 Vertical Drum Core

Rs  47.80

   ( Out Of Stock )

  Qty  

160uH 500mA Drum Core Inductor - 10x12

Model:  160uH-500mA-10x12
Category: 500mA Inductors
160uH - 0.16mH 500mA Radial Leaded Drum Core Power Inductor With Heat Shrink Sleeve Covering.
Inductance: 160uH (0.16mH) ±10%, Current Rating (RMS): 500mA, Diameter: 10.5mm ±0.5mm, Height: 12.5mm ±0.5mm, Lead spacing: 5.5mm ±0.5mm Shielding: Unshielded, Mounting Type: Through Hole, Package/Case: Radial, 10x12 Vertical Drum Core

Rs  48.70

   ( Out Of Stock )

  Qty  

180uH 500mA Drum Core Inductor - 10x12

Model:  180uH-500mA-10x12
Category: 500mA Inductors
180uH - 0.18mH 500mA Radial Leaded Drum Core Power Inductor With Heat Shrink Sleeve Covering.
Inductance: 180uH (0.18mH) ±10%, Current Rating (RMS): 500mA, Diameter: 10.5mm ±0.5mm, Height: 12.5mm ±0.5mm, Lead spacing: 5.5mm ±0.5mm Shielding: Unshielded, Mounting Type: Through Hole, Package/Case: Radial, 10x12 Vertical Drum Core

Rs  49.60

   ( Out Of Stock )

  Qty  

1mH 500mA Drum Core Inductor - 12x15

Model:  1mH-500mA-12x15
Category: 500mA Inductors
1mH - 1000uH 500mA Radial Leaded Drum Core Power Inductor With Heat Shrink Sleeve Covering.
Inductance: 1mH (1000uH) ±10%, Current Rating (RMS): 500mA, DC Resistance (Max): 622m? (milliohms), Diameter: 12.5mm ±0.5mm, Height: 15.5mm ±0.5mm, Lead spacing: 7.5mm ±0.5mm Shielding: Unshielded, Mounting Type: Through Hole, Package/Case: Radial, 12x15 Vertical Drum Core

Rs  66.10

   ( Out Of Stock )

  Qty  

AND Gate Using LED And Diode on Dot Matrix PCB

Model:  Diode-LED-AND-Gate-DMP
Category: Projects On General PCB
Assembled Full Working Project
LEDs And Diode Based AND Gate Circuit on Dot Matrix General Purpose PCB.
Components Used: Switches, LED's, Resistors, Diode, Connector, Battery, Dot-Matrix PCB etc.
Project Content: Assembled Project PCB - 1pc, Battery Cable - 1pc and 9V Battery - 1pc.
Project On Breadboard: AND Gate Using LED And Diode on Breadboard

Rs  199.00

   ( Out Of Stock )

  Qty  
2 Transistors 2-LEDs Flasher PCB with Copper Pour.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Copper Pour Clearances: 1.4mm, Mounting Hole: 4 x 3mm.
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.
Project On Breadboard: Transistors LED Flasher On Breadboard

Rs  94.00

   ( Out Of Stock )

  Qty  
IR Infrared Obstacle Sensor Module PCB - LM358 - Print Out on Toner Transfer Paper.
PCB Size: 0.9"x1.9" (23mm x 48mm), Trace Width: 0.75mm, Mounting Hole: 1 x 3mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: IC LM358 (1pc), IR Emitter (1pc), IR Receiver (1pc), LED 5mm Red (1pc), Resistor 0.25W 1.5K, 22K & 180 Ohm (1pc each), 3-Pin Relimate Male Header (1pc), Small Preset 20K (1pc), Blank PCB 1x2 (1pc).
Note: You can change the components according to your requirement.

Rs  8.00

   ( 48pcs In Stock )

  Qty  
2 Transistors 2-LEDs Flasher PCB (Copper Pour) Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Copper Pour Clearances: 1.4mm, Mounting Hole: 4 x 3mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Blank PCB 2x3 (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

Rs  8.00

   ( 50pcs In Stock )

  Qty  
2 Transistors 2-LEDs Flasher PCB Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Copper Pour Clearances: 1.4mm, Mounting Hole: 4 x 3mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Blank PCB 2x3 (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

Rs  8.00

   ( 49pcs In Stock )

  Qty  
2A Full Wave Bridge Rectifier Power Supply PCB (Copper Pour) Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement.

Rs  8.00

   ( 51pcs In Stock )

  Qty  
2A Full Wave Bridge Rectifier Power Supply PCB Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement.

Rs  8.00

   ( 53pcs In Stock )

  Qty  
Showing 1681 to 1695 of 1699 (114 Pages)