• Your shopping cart is empty!



IR Infrared Obstacle Sensor Module PCB - LM358 - Print Out on Toner Transfer Paper.
PCB Size: 0.9"x1.9" (23mm x 48mm), Trace Width: 0.75mm, Mounting Hole: 1 x 3mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: IC LM358 (1pc), IR Emitter (1pc), IR Receiver (1pc), LED 5mm Red (1pc), Resistor 0.25W 1.5K, 22K & 180 Ohm (1pc each), 3-Pin Relimate Male Header (1pc), Small Preset 20K (1pc), Blank PCB 1x2 (1pc).
Note: You can change the components according to your requirement.

Rs  8.00

   ( 48pcs In Stock )

  Qty  
2 Transistors 2-LEDs Flasher PCB (Copper Pour) Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Copper Pour Clearances: 1.4mm, Mounting Hole: 4 x 3mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Blank PCB 2x3 (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

Rs  8.00

   ( 50pcs In Stock )

  Qty  
2 Transistors 2-LEDs Flasher PCB Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Copper Pour Clearances: 1.4mm, Mounting Hole: 4 x 3mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Blank PCB 2x3 (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

Rs  8.00

   ( 49pcs In Stock )

  Qty  
2A Full Wave Bridge Rectifier Power Supply PCB (Copper Pour) Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement.

Rs  8.00

   ( 52pcs In Stock )

  Qty  
2A Full Wave Bridge Rectifier Power Supply PCB Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement.

Rs  8.00

   ( 54pcs In Stock )

  Qty  
Center Tapped Transformer Full Wave Rectifier Power Supply PCB (Copper Pour) Print Out on Toner Transfer Paper..
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N4007 (2pcs), Capacitor 2200uF (1pc), Capacitor 100nF (1pc), LED 5mm (1pc), Resistor 0.5W 1.5K (1pc), 3 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

Rs  8.00

   ( 50pcs In Stock )

  Qty  
2 Transistors 2-LEDs Flasher PCB (Copper Pour) with Toner Transferred, Ready for Etching.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Copper Pour Clearances: 1.4mm, Mounting Hole: 4 x 3mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

Rs  36.80

   ( Out Of Stock )

  Qty  
2 Transistors 2-LEDs Flasher PCB with Toner Transferred, Ready for Etching.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Mounting Hole: 4 x 3mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

Rs  36.80

   ( Out Of Stock )

  Qty  
Center Tapped Transformer Full Wave Rectifier Power Supply PCB (Copper Pour) with Toner Transferred, Ready for Etching.
PCB: 1.9"x2.9" (49mm x 74mm) Paper Phenolic Single Sided, Track Width: 2mm, Copper Pour Clearances: 1.5mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N4007 (2pcs), Capacitor 2200uF (1pc), Capacitor 100nF (1pc), LED 5mm (1pc), Resistor 0.5W 1.5K (1pc), 3 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

Rs  36.80

   ( Out Of Stock )

  Qty  
High Quality Female To Female Single Core Full Shielded Jumper Wire with Protective Heat Shrink Sleeve for Very High Sensitive Low Level Signals, Microphone Signals, Tape Head, ADC Inputs, Sensor Signals, Analog Signals, Audio Signals etc.
End Terminals: Gold Plated Female Pins, Terminals Wire: Red-Signal Black-Ground (Shielding 99%), Length: 30cm, Wire: Chetan 14/44 SWG 1 Core, Jacket Sleeve Color: White, Black or Red.

Rs  62.00

   ( Out Of Stock )

  Qty  
High Quality Female To Female Single Core Full Shielded Jumper Wire with Protective Heat Shrink Sleeve for Very High Sensitive Low Level Signals, Microphone Signals, Tape Head, ADC Inputs, Sensor Signals, Analog Signals, Audio Signals etc.
End Terminals: Gold Plated Female Pins, Terminals Wire: Red-Signal Black-Ground (Shielding 99%), Length: 50cm, Wire: Chetan 14/44 SWG 1 Core, Jacket Sleeve Color: White, Black or Red.

Rs  76.00

   ( Out Of Stock )

  Qty  
2 Transistors 2-LEDs Flasher PCB with Copper Pour.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 1.25mm, Copper Pour Clearances: 1.4mm, Mounting Hole: 4 x 3mm.
Components Required: Diode 1N4007 (1pc), Capacitor 22uF 63V (2pcs), LED 5mm Red (1pc), LED 5mm Green (1pc), Resistor 0.25W 18K (2pc), Resistor 0.25W 470 Ohm (2pc), Transistors BC547 (2pcs), Variable Resistor (Preset) 10K (1pc), Relimate 2-pin Male Header 5.08mm (1pc), Working Voltage: 5 to 9V DC.
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.
Project On Breadboard: Transistors LED Flasher On Breadboard

Rs  94.00

   ( Out Of Stock )

  Qty  
High Quality Female To Female Single Core Full Shielded Jumper Wire with Protective Heat Shrink Sleeve for Very High Sensitive Low Level Signals, Microphone Signals, Tape Head, ADC Inputs, Sensor Signals, Analog Signals, Audio Signals etc.
End Terminals: Gold Plated Female Pins, Terminals Wire: Red-Signal Black-Ground (Shielding 99%), Length: 100cm, Wire: Chetan 14/44 SWG 1 Core, Jacket Sleeve Color: White, Black or Red.

Rs  112.80

   ( Out Of Stock )

  Qty  

AND Gate Using LED And Diode on Dot Matrix PCB

Model:  Diode-LED-AND-Gate-DMP
Category: Projects On General PCB
Assembled Full Working Project
LEDs And Diode Based AND Gate Circuit on Dot Matrix General Purpose PCB.
Components Used: Switches, LED's, Resistors, Diode, Connector, Battery, Dot-Matrix PCB etc.
Project Content: Assembled Project PCB - 1pc, Battery Cable - 1pc and 9V Battery - 1pc.
Project On Breadboard: AND Gate Using LED And Diode on Breadboard

Rs  199.00

   ( Out Of Stock )

  Qty  
Pre-cut, pre-formed and pre-stripped wires simplify and speed up breadboarding work.
Wire: 22SWG (Diameter: 0.711 mm) Insulated Solid Tinned Copper, Length: Assorted 0.3 inch to 2.1 Inch (7.62mm to 53.34mm) ±1mm
Breadboard Pitch: 3 to 21, Quantity: 27 Pcs (All available colors).

Rs  51.00

   ( 11pcs In Stock )

  Qty  
Pre-cut, pre-formed and pre-stripped wires simplify and speed up breadboarding work.
Wire: 22SWG (Dia: 0.711 mm) Insulated Solid Tinned Copper, Length: Assorted 0.4 inch to 0.9 Inch ±1mm, Breadboard Pitch: 4 to 9, Quantity: 50 Pcs (All available colors, Black, Red, Yellow, Green, Blue and White).

Rs  76.00

   ( 16pcs In Stock )

  Qty  
Pre-cut, pre-formed and pre-stripped wires simplify and speed up breadboarding work.
Wire: 22SWG (Diameter: 0.711 mm) Insulated Solid Tinned Copper
Length: Assorted 0.3 inch to 2.1 Inch (7.62mm to 53.34mm) ±1mm
Breadboard Pitch: 3 to 21
Quantity: 62 Pcs (All available colors, Black, Red, Yellow, Green, Blue and White).

Rs  115.00

   ( 8pcs In Stock )

  Qty  
Pre-cut, pre-formed and pre-stripped wires simplify and speed up breadboarding work.
Wire: 22SWG (Diameter: 0.711 mm) Insulated Solid Tinned Copper, Length: Assorted 0.3 inch to 2.1 Inch (7.62mm to 53.34mm) ±1mm, Breadboard Pitch: 3 to 21, Quantity: 74 Pcs (All available colors, Black, Red, Yellow, Green, Blue and White).

Rs  136.00

   ( 7pcs In Stock )

  Qty  
Medium Quality mini alligator clip to alligator clip cable.
Length: 40cm (0.4Mtr), Clip Size: Small 35mm, Quantity: 1pc, Color: Assorted Available Colors.

Rs  15.10

   ( Out Of Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 14/37 SWG, Wire Current Rating: 2.5Amps Max., Wire Length: 4cm (1.57")±1cm, Male Header: No.

Rs  9.00

   ( 10pcs In Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 7/38 SWG, Wire Current Rating: 1Amp Max., Wire Length: 5cm (2")±1cm, Male Header: No.

Rs  8.45

   ( 20pcs In Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 7/37 SWG, Wire Current Rating: 1.3Amps Max., Wire Length: 5cm (2")±1cm, Male Header: No.

Rs  8.35

   ( 20pcs In Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 7/36 SWG, Wire Current Rating: 1.5Amps Max., Wire Length: 5cm (2")±1cm, Male Header: No.

Rs  8.55

   ( 28pcs In Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 14/38 SWG, Wire Current Rating: 2Amps Max., Wire Length: 5cm (2")±1cm, Male Header: No.

Rs  9.20

   ( Out Of Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 14/37 SWG, Wire Current Rating: 2.5Amps Max., Wire Length: 5cm (2")±1cm, Male Header: No.

Rs  9.35

   ( 10pcs In Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 14/37 SWG, Wire Current Rating: 2.5Amps Max., Wire Length: 6cm (2.36")±1cm, Male Header: No.

Rs  9.70

   ( 10pcs In Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 7/38 SWG, Wire Current Rating: 1Amp Max., Wire Length: 7.5cm (2.9")±1cm, Male Header: No.

Rs  8.60

   ( 20pcs In Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 7/37 SWG, Wire Current Rating: 1.3Amps Max., Wire Length: 7.5cm (2.9")±1cm, Male Header: No.

Rs  8.85

   ( 20pcs In Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 7/36 SWG, Wire Current Rating: 1.5Amps Max., Wire Length: 7.5cm (2.9")±1cm, Male Header: No.

Rs  9.10

   ( 28pcs In Stock )

  Qty  
This is a high quality 2 way relimate connector cable. It has polarized female header with 2.54mm (0.1") pitch at both end.
Wire: Chetan 14/38 SWG, Wire Current Rating: 2Amps Max., Wire Length: 7.5cm (2.9")±1cm, Male Header: No.

Rs  9.95

   ( Out Of Stock )

  Qty  
Showing 1 to 30 of 1699 (57 Pages)