2A Full Wave Bridge Rectifier Power Supply PCB Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement.

2A Full Wave Bridge Rectifier Power Supply PCB (Copper Pour) Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement.

D25SB80 800V 25A Flat Bridge Rectifier.

D15SB80 800V 15A Flat Bridge Rectifier.

BR1010 - 10Amps 700V Bridge Rectifier.

D25SBA80 800V 25A Flat Bridge Rectifier.

35A 1000V Bridge Rectifier KBPC3510
Brand: Radcom

35A 1000V Bridge Rectifier KBPC3510

50 Amps 1000 Volts Bridge Rectifier KBPC5010

2A Full Wave Bridge Rectifier Power Supply PCB With Copper Pour.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm, Mounting Hole: 4 x 3mm.
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note: You can change the components according to your requirement.

5A Full Wave Bridge Rectifier Power Supply PCB.
Size: 2.9"x3.9" (74mm x 99mm), Track Width: 3mm, Copper Pour Clearances: 1.5mm, Mounting Hole: 4 x 3mm.

Components Required: Diode 6A4 (4pcs), Capacitor 4700uF - 50V (2pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 3.9K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note:
1.) You can change the components according to your requirement.
2.) You can select available option to Print Your Name on PCB.

2A Full Wave Bridge Rectifier Power Supply PCB (Copper Pour) with Toner Transferred, Ready for Etching.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note: You can change the components according to your requirement.

G2SBA60 600V 1.5A Flat Bridge Rectifier.

Assembled Unregulated Power Supply - Full Wave Bridge Rectifier

This kit is a quick, neat, and inexpensive way to provide a smoothed 3V to 36V, 1A to 5A (Depending on transformer voltage & components), unregulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: Green for transformer connection, Output: 2 x Red Positive and 2 x Black Negative
Components Used: PCB (1.9"x2.9"), Diode, LED 5mm, 1.5K 0.5W CFR Resistor, Electrolytic Capacitor, Vishay 100nF 250V Polyester Film Capacitor, 2 Way PCB Terminal Block etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

2A Full Wave Bridge Rectifier Power Supply PCB.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Mounting Hole: 4 x 3mm.
Components Required: Diode 1N5408 (4pcs), Capacitor 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note: You can change the components according to your requirement.