2A Full Wave Bridge Rectifier Power Supply PCB (Copper Pour) Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement.

2A Full Wave Bridge Rectifier Power Supply PCB Print Out on Toner Transfer Paper.
PCB Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. Design Print: On Toner Paper (A5/A6), PCB Design & Printout Ratio: 1:1
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc), Blank PCB 2x3 (1pc).
Note: You can change the components according to your requirement.

2A Full Wave Bridge Rectifier Power Supply PCB (Copper Pour) with Toner Transferred, Ready for Etching.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm. PCB Etching: No, PCB Drilling: No
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note: You can change the components according to your requirement.

2A Full Wave Bridge Rectifier Power Supply PCB.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Mounting Hole: 4 x 3mm.
Components Required: Diode 1N5408 (4pcs), Capacitor 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note: You can change the components according to your requirement.

2A Full Wave Bridge Rectifier Power Supply PCB With Copper Pour.
Size: 1.9"x2.9" (49mm x 74mm), Track Width: 2.25mm, Copper Pour Clearances: 1.5mm, Mounting Hole: 4 x 3mm.
Components Required: Diode 1N5408 (4pcs), Capacitor 2200uF, 3300uF Or 4700uF (1pc), Capacitor 100nF - 100V (1pc), LED 5mm Red (1pc), Resistor 0.5W 1.5K (1pc), 2 Way PCB Terminal Block (1pc), 4 Way Multi-color Red+Black PCB Terminal Block (1pc).
Note: You can change the components according to your requirement.

Assembled Unregulated Power Supply - Full Wave Bridge Rectifier

This kit is a quick, neat, and inexpensive way to provide a smoothed 3V to 36V, 1A to 5A (Depending on transformer voltage & components), unregulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: Green for transformer connection, Output: 2 x Red Positive and 2 x Black Negative
Components Used: PCB (1.9"x2.9"), Diode, LED 5mm, 1.5K 0.5W CFR Resistor, Electrolytic Capacitor, Vishay 100nF 250V Polyester Film Capacitor, 2 Way PCB Terminal Block etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

Assembled 1A Regulated Power Supply - Full Wave Bridge Rectifier and 7805

This kit is a quick, neat, and inexpensive way to provide a smoothed 5V, 1A regulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: 6V to 12V AC (Green for transformer connection), Output: 5V DC Max. 1A (2 x Red Positive and 2 x Black Negative)
Components Used: PCB (2.9"x3.9"), Diode, Fixed Voltage Regulator, LEDs, Resistors, Electrolytic Capacitor, Polyester Film Capacitor, PCB Terminal Block, Heatsink etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

Assembled Unregulated Power Supply - Full Wave Bridge Rectifier

This kit is a quick, neat, and inexpensive way to provide a smoothed 3V to 36V, 1A to 8A (Depending on transformer & components), unregulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: Green for transformer connection, Output: 2 x Red Positive and 2 x Black Negative
Components Used: PCB (2.9"x3.9"), Diode, LED 5mm, 2.7K 0.5W CFR Resistor, Electrolytic Capacitor, Vishay 100nF 250V Polyester Film Capacitor, 2 Way PCB Terminal Block etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

Assembled 1A Regulated Power Supply - Full Wave Bridge Rectifier and 7806

This kit is a quick, neat, and inexpensive way to provide a smoothed 6V, 1A regulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: 7.5V to 12V AC (Green for transformer connection), Output: 6V DC Max. 1A (2 x Red Positive and 2 x Black Negative)
Components Used: PCB (2.9"x3.9"), Diode, Fixed Voltage Regulator, LEDs, Resistors, Electrolytic Capacitor, Polyester Film Capacitor, PCB Terminal Block, Heatsink etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

Assembled 1A Regulated Power Supply - Full Wave Bridge Rectifier and 7808

This kit is a quick, neat, and inexpensive way to provide a smoothed 8V, 1A regulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: 9V to 12V AC (Green for transformer connection), Output: 8V DC Max. 1A (2 x Red Positive and 2 x Black Negative)
Components Used: PCB (2.9"x3.9"), Diode, Fixed Voltage Regulator, LEDs, Resistors, Electrolytic Capacitor, Polyester Film Capacitor, PCB Terminal Block, Heatsink etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

Assembled 1A Regulated Power Supply - Full Wave Bridge Rectifier and 7809

This kit is a quick, neat, and inexpensive way to provide a smoothed 9V, 1A regulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: 9V to 12V AC (Green for transformer connection), Output: 9V DC Max. 1A (2 x Red Positive and 2 x Black Negative)
Components Used: PCB (2.9"x3.9"), Diode, Fixed Voltage Regulator, LEDs, Resistors, Electrolytic Capacitor, Polyester Film Capacitor, PCB Terminal Block, Heatsink etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.

Assembled 1A Regulated Power Supply - Full Wave Bridge Rectifier and 7812

This kit is a quick, neat, and inexpensive way to provide a smoothed 12V, 1A regulated DC power supply suitable for powering many electronics circuits. It only requires the AC output of a transformer (not supplied).
Input: 12V to 15V AC (Green for transformer connection), Output: 12V DC Max. 1A (2 x Red Positive and 2 x Black Negative)
Components Used: PCB (2.9"x3.9"), Diode, Fixed Voltage Regulator, LEDs, Resistors, Electrolytic Capacitor, Polyester Film Capacitor, PCB Terminal Block, Heatsink etc.
Note: You can customized this Assembled Kit by selecting capacitor and diodes from Available Options.